This
mandrel is used to mount wheels in a drill or
a lathe in order to polish or machine the wheels. The mandrel
can also be used in a dremel.
The wheels can be mounted in either direction to
aid in polishing the inside edge of the wheel.
The mandrel screw has a beveled face to ensure
that the wheel is centered on the mandrel screw.
Tighten the
mandrel screw unitl the wheel is firmly in place, but do
not over tighten as the wheel could be damaged. This
is especially important for wheels made with a softer plastic,
such as those supplied by Awana.
When the wheel is mounted,
spin the wheel while holding it lightly against a sandpaper
block.
view
shopping cart 
return
to Tools page 
