Pinewood Derby Car Fenders


	Add fenders to your Pinewood Derby car . It's as easy as ABC!
	view shopping cart product catalog home


	Pinewood Derby Car Fenders

These fenders are glued to the side of your car block before you shape your car.
Not recommended for use on pre-cut cars.

Rear fenders also available

Instructions

Attach the wheels and axles to your block. Position the fenders so that there is equal spacing around the wheels. The bottom of the fender will not be flush with the bottom of the block. Glue the fenders to the block with a good wood glue. Secure in place with clamps or rubber bands.

If your design has the fenders rising above the car body at any point then it will be easier to glue the fender on the body after the fender has been shaped.

After the glue has dried, remove the wheels and trace your design on both sides of the car. Cut with a band saw or coping saw.

Round the edges and smooth the rough spoets with sandpaper or a file.

The fenders may cause some cars to exceed the 5 oz maximum weight. You can remove weight by drilling holes in the bottom of the car near the front.

		"How To" Books
		"How To" Video
		Car Designs
		Car Blocks
		Pre-Cut Cars
		Car Parts
		Car Kits
		Car Fenders
		Completed Cars
		Tools

		Axles
		Axle Sandpaper
		Axle Polish
		Wheels
		Awana Wheels & Axles
		Weights
		Graphite and Lube
		Tools

		Car Decals
		Wheel Decals
		Racing Stripes
		Body Skins
		Paint
		Car Eyes
		Mud Stick
		Car Accessories

		Practice Track
		Car Carrying Case
		Car Tune Up Kit
		Digital Scale
		Down and Derby
		Car Paint Stand
		Car Inspection Gauge
		Product Catalog
Can't find what you are looking for? Search our site.

		Home
		Site Map
		What is the Pinewood Derby?
		Pinewood Derby Rules
		Questions and Answers
		Car Photo Gallery
		Shipping and Returns
		Privacy Notice
		Pinewood Links
		Contact Us

		Design and build your Pinewood Derby Car
		Build a fast Derby Car
		Run a Pinewood Race
		Build a Derby Track
		Build a Car Stand
		Paint Chrome Wheels
		Use a Rasp
		Use a Coping Saw
		Use Decals