Pinewood
Derby Car Axle Sandpaper Kit
This kit includes:
- Two stripes of #400 sandpaper
- Two stripes of $1200 sandpaper
- Instructions
Each kit contains enough sandpaper to polish two
sets of axles.
Instructions
| Note: Before using this sandpaper, use
a small file to remove the burr and crimp marks from the axles. |
 |
1. Insert the axle into a drill. Leave at least ½” of
axle exposed.
|
2. Use the #400 sandpaper first. It has a red mark on the back. |
3. Dip the sandpaper strip into a glass of water.
4. Hold each end of the strip with each hand.
5. Use about 1/2” of new paper to sand the axle for about 15 seconds at
low speed.
|
6. Repeat using the #1200 sandpaper (no red mark on
the back).
7. Remove the axle from the drill and dry with a soft cloth. |
|
view
shopping cart 
product
catalog
