Certified Safe Site
Jan 23 2025
Pinewood Derby on Facebook
pinewood derby

Add LEGO pieces to this pinewood derby block to build your next car. 

Example of pinewood car
Home

 

 

 

 

 

 

 

 

 

 

 

 

 

Most pinewood derby rules limit the length of the car to 7" so don't add any LEGO pieces that extend past the front or back of the block.

 

 

 

 

 

You can add LEGO pieces that make your car wider but the width should not exceed 2 3/4 inches.

 

 

 

 

 

As a general rule, the height of your car should not be greater than 3 inches.

Build your next Pinewood Derby Car with LEGOs

Lego Pinewood Derby Car Block

LEGO Pinewood Derby Car Block

Make your next pinewood derby car with LEGO blocks! This is an official pinewood derby block with LEGO plates glued on top. You can use your own LEGO pieces to make a car or use our LEGO kits. This car is legal in most races but you should check your local rules before ordering.

LEGO Pinewood Derby Car Blocks

Lego pinewood derby car block

Includes one official pinewood derby block that has been cut down and shaped to fit the LEGO plates that are glued to the top. Weight of block + plates is 1.4 oz.

Standard pinewood derby block dimensions and axle slots.

Wheels and axles are not included

Lego Blocks

LEGO Base Plates

Lego base plates

These plates can be used to make a 7 inch long LEGO car for pinewood derby races. To use, cut a pinewood derby block to 1/2" thickness then glue these Base Plates to the top of the block.  Add your LEGO pieces or our LEGO Kits to create a car. Wheels not included.

LEGO Base Plates

LEGO Kits

Assembly instructions are not included with our LEGO Kits but you can
download or print pictures of all LEGO cars here.
Lego pinewood derby car parts
Each LEGO kit contains approximately 70 pieces. Each piece is selected to give a wide range of possible car designs.

The number and type of pieces vary slightly with each kit depending on availability of the pieces.

Add your own pieces for even more variety.

Blue lego car kit

Example of a pinewood derby car made from the blue LEGO kit

Blue LEGO Car Kit

This kit contains mostly blue pieces with a few black pieces and a gray curved piece that can be used as a cockpit/windshield.

The car on the left is just an example of the many designs that can be built with the parts in this kit. We do not supply instructions to build the example car but these close up pictures will give you a good idea of how to construct this car.

Block and wheels not included

Blue Lego Kit
Black/Gray Lego kit for pinewood derby cars

Example of a car made from the black/gray LEGO kit

Black/Gray LEGO Car Kit

This kit contains a mix of black and gray pieces with a dark red curved piece that can be used as a cockpit/windshield.

The car on the left is just an example of the many designs that can be built with the parts in this kit. We do not supply instructions to build the example car but these close up pictures will give you a good idea of how to construct this car.

Block and wheels not included

Black/Gray Lego Kit
Gray Lego kit for pinewood derby cars

Example of a car made from the gray LEGO kit

Gray LEGO Car Kit

This kit contains mostly gray pieces with a few black pieces and a black curved piece that can be used as a cockpit/windshield.

The car on the left is just an example of the many designs that can be built with the parts in this kit. We do not supply instructions to build the example car but these close up pictures will give you a good idea of how to construct this car.

Block and wheels not included

Gray Lego Kit
Red Lego Car Kit

Example of a car made from the red LEGO kit

Red LEGO Car Kit

This kit contains mostly red pieces with a few yellow pieces and a black curved piece that can be used as a cockpit/windshield.

The car on the left is just an example of the many designs that can be built with the parts in this kit. We do not supply instructions to build the example car but these close up pictures will give you a good idea of how to construct this car.

Block and wheels not included

Red Lego Kit
PInk/WhiteLego Car Kit

Example of a car made from the white/pink LEGO kit

White/Pink LEGO Car Kit

This kit contains a mix of pink and white pieces with a dark red curved piece that can be used as a cockpit/windshield.

The car on the left is just an example of the many designs that can be built with the parts in this kit. We do not supply instructions to build the example car but these close up pictures will give you a good idea of how to construct this car.

Block and wheels not included

White/Pink Lego Kit
Yellow pinewood derby car made of legos

Example of a car made from the yellow LEGO Kit

Yellow LEGO Car Kit

This kit contains mostly yellow pieces with a few brown pieces and a brown curved piece that can be used as a cockpit/windshield.

The car on the left is just an example of the many designs that can be built with the parts in this kit. We do not supply instructions to build the example car but these close up pictures will give you a good idea of how to construct this car.

Block and wheels not included

Yellow Lego Kit
Orange - Black Lego Pinewood Derby Car

Example of a car made from the orange/black LEGO kit

Orange/Black LEGO Car Kit

This kit contains a mix of orange and black pieces with a dark red curved piece that can be used as a cockpit/windshield.

The car on the left is just an example of the many designs that can be built with the parts in this kit. We do not supply instructions to build the example car but these close up pictures will give you a good idea of how to construct this car.

Block and wheels not included

Orange/Black Lego Kit
Green-Yellow Lego Pinewood Derby Car Kit

Example of a car made from the green/yellow LEGO kit

Green/Yellow LEGO Car Kit

This kit contains a mix of green and yellow pieces with black curved piece that can be used as a cockpit/windshield.

The car on the left is just an example of the many designs that can be built with the parts in this kit. We do not supply instructions to build the example car but these close up pictures will give you a good idea of how to construct this car.

Block and wheels not included

Green/Yellow Lego Kit
Bulk LEGO Parts
Example one pound of bulk parts

Bulk LEGO Parts

Wheels and frame are not included

Same parts that are in the above kits but sold by the pound. Each pound contains approximately 350 pieces in a variety of colors. About 5 cars can be built with each bulk kit..

 

pounds

LEGO Car Accessory Kits

Lego windshield on pinewood derby car

Example of the windshield kit and the orange/black car kit.
Driver not included

LEGO Windshield Kit

Lego windshield kit

This kit contains a windshield and steering wheel.
Use your own LEGO figure for a driver.

Lego Windshield Kit
Lego engine on pinewood derby car

Example of the engine kit and the green/yellow car kit.
Driver not included

LEGO Engine Kit

Lego engine kit

This kit contains one engine and two grills/vents.

  Lego Engine Kit

Lego jet engine on pinewood derby car

Example of the jet kit and the gray car kit.

LEGO Jet Engines Kit

Requires LEGO Frame sold above

LEGO Jet Engine Kit

This kit contains a set of two jet engines.

  Lego Jet Engines

Wheels and Axles

Stock Wheels and Axles

Stock Wheels and Axles

If you are holding your own races then these wheels and axles are an economical alternative to the official pinewood derby wheels and axles. They are the same dimensions as the official BSA wheels and axles but these high quality components don't require as much preparation. Just file the crimp marks off of the axle head and you are all set. If you need official BSA wheels, they are available here.

(4 wheels and axles per set)

wheels and axles

LEGO Car Paints

The car block should be painted before you add the LEGO pieces. You can use a color that matches the color theme of the LEGO pieces that you will be using or use a neutral color like white, gray or black. You can paint the side of the LEGO plate but do not paint the top. You can mask the top by covering the top with old LEGO pieces. Remove the old pieces before the paint dries.
For a Protective
clear final coat

Gloss Clear

$3.95 ea.
 

White

$2.95 ea.
 

Gray

$2.95 ea.
 

Black

$2.95 ea.
 

Brown

OUT OF STOCK
 

Pink

OUT OF STOCK
 

Red

OUT OF STOCK
 

Orange

$2.95 ea.
 

Yellow

OUT OF STOCK
 

Green

$2.95 ea.
 

Blue

OUT OF STOCK
 

LEGO Car Weights

Weight pocket
A LEGO pinewood derby car will need about 2 oz of additional weight to bring the car up to the 5 oz limit. An easy way to add weight is to create a pocket near the rear of the car with the LEGO pieces then fill the pocket with weights. Cover the pocket with more LEGO pieces.  You can also add weights to the bottom of the block.
Zinc LEGO Brick Weights

Pinewood Pro™ - PRO Brick Zinc Weights


Each brick is .44 oz
Snaps onto any standard LEGO part

  Lego Brick weights set of two
Tungsten Cubes

6 Tungsten Cubes


Each cube is 1/4"
Total weight: 1 oz.

1/4" Cubes

Tungsten Plate

Tungsten Plate



Each plate is 1/2 oz and screws onto the bottom of the car.


OUT OF STOCK
Steel Bottom Weight

Steel Bottom Weight

The weight is 1 oz and can be glued to the bottom of the car. Sections can be broken off to adjust the weight.


1 oz. Bottom Weight sets
Assembly instructions are not included with our LEGO Kits but you can
download or print pictures of all LEGO cars on this page here.
To place your order:
1. Enter the quantity you would like to order next to each of the above items.
2. Click the "Add to Cart" button below.

Customer Photos

Judge's Choice winner for LEGO pinewood derby car

LEGO pinewood derby car
My son, Beau, won Judge's Choice with his Lego car!... Brad B
LEGO Speed Champions Chevrolet Camaro kit
This car was built using pieces from the LEGO Speed Champions Chevrolet Camaro ZL1 Race Car kit. Additional pieces were added to lengthen the car to fit the frame.

Build a Car

Make it Fast

Make it Look Great

Extras


Information

How To