Follow these easy steps to
add racing stripes to your Pinewood Derby Car
***Before
You Start ***
Your car should have its final coat of paint
but not a clear coat.
The clear coat should be added after the racing
stripes.
Your car should be clean of all dirt and dust.
1. Make small marks on the car
where the stripes will go. |
2. Select the stripe that you want to use and lift one end off
of the backing paper. |
3. Position one end of the stripe on the car and hold it down
with a finger. |
4. Keep the stripe tight and place the other end on the car.
Run your finger over the stripe to attach it to the car.
Cut any excess length with a scissors. |
5. Continue with the other stripes.
6. We recommend coating the car with a clear gloss
finish to protect the paint and stripes from scratches and other
damage.
Return
to the Racing Stripes Page |
view
shopping cart 
product
catalog
