Pinewood Derby Car Paint/Display Stand Assembly Instructions
 |
| Thedisplay stand has five pieces |
Assembly Instructions
1. Insert the small tab of the bracket into the base |
 2. Insert the large tab of the bracket into the bottom of the platform (The top of the platform has two slotted tabs on the front). Glue should not be needed but you can use a small amount of super glue on the tabs for a more secure fit. |
| Use as a Paint Stand | |
1. Place the small plastic insert into the slot in the top of the platform. |
2. Place your car on the platform so that the front axle slot fits into the plastic insert. |
| You can hold the base or bracket while painting the car or just place a hand on the base to keep it steady. | |
| Use as a Display Stand | |
|
 |
| Place the car on the platform so that the front wheels fit in the slots of the tabs on the platform. The small plastic insert is not needed when used as a display stand. If you used this stand to paint your car, remove the plastic insert first. | |
Customize your Display Stand You can paint your display stand a variety of colors and add decals as shown in the below examples. This would be a great group project. |
|
 |
 |
 |
 |
 |