Axle Sandpaper Kit

This kit includes:

  • Two stripes of #400 sandpaper
  • Two stripes of $1200 sandpaper
  • Instructions

Each kit contains enough sandpaper to polish two sets of axles.

Instructions

Note: Before using this sandpaper, use a small file to remove the burr and crimp marks from the axles. kit-dragster-27.jpg
1. Insert the axle into a drill. Leave at least ½” of axle exposed.
 2. Use the #400 sandpaper first. It has a red mark on the back.

6.  Repeat using the #1200 sandpaper (no red mark on the back).
7. Remove the axle from the drill and dry with a soft cloth.

3. Dip the sandpaper strip into a glass of water.
4. Hold each end of the strip with each hand.
5. Use about 1/2” of new paper to sand the axle for about 15 seconds at low speed.

  
Close Window